KBox B-201-CFL - User Guide, Rev 1.3
// 37
•
Install Wi-Fi antenna on the rear panel (clearance 45 mm and 130 mm from Wi-Fi hinge)
Expansion cards and memory installation should be performed before Installation.
8.1.
Chassis Feet
To use the KBox B-201-CFL on a desktop, install the supplied four self-adhesive chassis feet as follows:
1.
Ensure that the bottom surface is clean and free from dust and dirt.
2.
Remove the cover from the back of each of the self-adhesive chassis feet and carefully press the chassis
feet onto the bottom side (Figure 17).
Figure 17: Position of Chassis Feet
To improve stability, positioning chassis feet between the mounting hole and the outside
edge.
8.1.1.
Chassis Feet Mount Option
The KBox B-201-CFL with chassis feet can be operated in the upwards horizontal position only as shown in
.
Danger of Fire
If mounted horizontally with top cover facing downward, the KBox B 201-CFL may overheat
and hot substances may exit through the top cover’s ventilation openings causing a fire
hazard. To avoid risk of fire observe the following:
•
DO NOT mount horizontally with the top cover facing downward
•
Only use the allowed mount orientations:
•
Horizontally (with top cover facing upwards)
•
Vertically (all possible mount orientations)
Figure 18: Chassis Feet Mount Option
Position of the chassis feet
