Audio Mode
To listen to radio stations in either Stereo or Mono mode:
1. In FM mode, press the MENU button on the remote control and then press the
buttons to select SCAN. Press the ENTER button to confirm.
2. Press the
buttons to select STEREO and MONO. Press the ENTER button to
confirm.
Presetting Stations
You can store up to 20 of your favourite FM stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold the PROG button. The display will show “## Empty”, and the preset
number will flash.
2. Press the /– buttons to select your desired station preset number.
3. Press the PROG button to confirm your station, the display will show “STORE”.
You can auto store the first 20 DAB stations that found, press and hold the PROG button for 2 seconds to
activate automatic programming. All available stations are programmed in according to waveband signal
reception strength (from strongest to weakest).
Recalling a Preset Station
Once you have saved a station to one of the preset buttons, you can recall it by pressing
the 0-9 buttons in pairs (e.g. 01, 02, 03) or press the / – buttons on the remote
control.
The stored stations will be saved into the memory and power off will not erase it. Storing a new station in
a preset location will erase the previously stored station in that location.
22
SDABTIP12_IB_130624_candice.indd 22
24/06/2013 2:43 PM
