Sandstrom S5GONGB13, Инструкция по эксплуатации

Страница: 17 / 24

17
When the Hob is First Installed
Once the hob has been installed, it is important to remove any protective materials, which were put
on in the factory.
Any gas installation must be carried out by a Gas Safe Registered engineer.
The manufacturer will not accept liability, should the above instructions or any of the other safety
instructions incorporated in this manual are ignored.
Connect the threaded elbow to the gas supply input if required. The washer (supplied) must be fitted
between these components, if any adjustments are made ensure parts are screwed together without
using excessive force.
Fitting
The dimensions of the cut-out are given in the diagram.
Width: 553 mm Depth: 473 mm
Product Overall Dimensions
Width: 680 mm Depth: 500 mm
63.5mm
63.5mm
175mm
473mm
553mm