background image

Installation & Operation Manual                                                                                   Merlin 1000S+ 

 

 

 

 

1000S+

 

IOM

 

Rev: 9    07-20

 

14 

 

IMPORTANT WARNING STATEMENTS 

 
Please take the time to thoroughly read this user’s guide which should be retained for future reference. 

 

 

It is recommended that this device be commissioned upon installation. 

 
Do not apply lighter gas or other aerosols to detectors – this will cause extreme damage to the gas sensing elements. 
 

High concentrations of alcohol found in many products may damage, deteriorate or affect the gas sensing elements 

of the detectors – Avoid exposure near your devices. 

 

Never ignore your devices when in alarm. Actuation of your alarm indicates the presence of an error or issue that 

requires immediate attention. 

 
This device requires a continual supply of electrical power – it will not work without power. 

 
This device should not be used to substitute proper installation, use and/or maintenance of fuel burning appliances 

including appropriate ventilation and exhaust systems. 

 

Your product should reach you in perfect condition, if you suspect it is damaged, contact your supplier

 

   

Manufacturer’s Warranty 

 
Warranty coverage:  

The manufacturer warrants to the original consumer purchaser, that this product will be free of defects in material and workmanship for 
a period of three (3) years from date of purchase. The manufacturer’s liability hereunder is limited to replacement of the product with 
repaired product at the discretion of the manufacture. This warranty is void if the product has been damaged by accident, 
unreasonable use, neglect, tampering or other causes not arising from defects in material or workmanship. This warranty extends to the 
original consumer purchaser of the product only.

 

 
Warranty disclaimers:  

Any  implied  warranties  arising  out  of  this  sale,  including  but  not  limited  to  the  implied  warranties  of  description,  merchantability  and 
intended operational purpose, are limited in duration to the above warranty period. In no event shall the manufacturer be liable for loss 
of use of this product or for any indirect, special, incidental or consequential damages, or costs, or expenses incurred by the consumer or 
any other user of this product, whether due to a breach of contract, negligence, strict liability in tort or otherwise. The manufacturer shall 
have no liability for any personal injury, property damage or any special, incidental, contingent or consequential damage of any kind 
resulting from gas leakage, fire or explosion. This warranty does not affect your statutory rights.

 

 
Warranty Performance:  

During the above warranty period, your product will be replaced with a comparable product if the defective product is returned together 
with proof of purchase date. The replacement product will be in warranty for the remainder of the original warranty period or for six months 
– whichever is the greatest.  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Information on waste disposal for consumers of electrical & electronic equipment. 

When this product has reached the end of its life it must be treated as Waste Electrical & Electronics Equipment (WEEE). 

Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment, recovery and 

recycling of the materials used. Please contact your supplier or local authority for details of recycling schemes in your area. 

 

Содержание Merlin 1000S+

















Отзывы: