Cruzer Enterprise USB Drive
User Guide
Revision
1.0
3.
Getting Started
3.1
Installing the Driver
To install the Cruzer Enterprise USB Drive driver:
•
Insert the Cruzer Enterprise USB Drive into an available USB port. The
Found New Hardware
message
is displayed indicating the driver installation.
Figure 1: Found New Hardware Message
3.2
Initializing the Device
After the hardware installation is complete, the Setup Wizard will guide you through the initial configuration
of the Cruzer Enterprise USB Drive. The Cruzer Enterprise Startup window appears:
Figure 2: Cruzer Enterprise Startup Window
1.
After a few seconds, the Setup Wizard begins. Select the language and click
Next
to continue.
© 2007 SanDisk® Corporation
4
May, 2007 Document No. UG-CRE-0507-14
