360 Herndon Parkway
Suite
1400
Herndon, VA 20170
http://www.rheintech.com
SanDisk Corporation
Page 8 of 17
DoC Report
2006137
04/27/07
3
PRODUCT LABELLING/ INFORMATION TO THE USER
3.1 DOC LABEL ON DEVICE
The label shall be located in a conspicuous location on the device and shall contain the unique
identification described in FCC CFR 47; Section 2.1074 (the unique model name), and the
following DoC logo:
SanDisk Corporation
SanDisk SSD SATA 5000 2.5”
3.2 DOC STATEMENT IN USER’S MANUAL
For a Class B digital device or peripheral, per FCC CFR 47; Section 15.105, the instructions
furnished the user shall include the following or similar statement, placed in a prominent location
in the text of the manual:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
3.3 LOCATION OF LABEL ON EUT
Label
Location
