Sanden Vendo G-SNACK, Руководство по программированию

Страница: 16 / 20

15
C06 SOLD-OUT MODE
This parameter is used to enable sold-out status of the spirals; if it’s enable (C6 = 1) when
the optical barrier doesn’t detect the product, the VMC set the spiral in sold-out status.
This feature is applied for master and slave.
The sold-out are cleared (also for the slave) when the door of the master is open.
If the optical barrier is disable, this feature doesn’t works.
C06 = 0 column always available
C06 = 1 column inhibited if empty was detected by previous vend
C07 SAVE CREDIT MODE
This parameter determines how the VMC has to manage the credit :
C07 = 0 Clears the credit if nothing happens in the last five minutes (default).
C07 = 1 Keeps the credit indefinitely.
C08 FORCE VEND
This parameter is used to prevent the use of the machine like a coin changer. When forced
vend is enable you can obtain escrow only in the following cases:
- If you insert money and make a selection (full or empty selection is the same)
- If you put coins that you can obtain like escrow (coins that go in the tube of the
coinage) and you don’t reach the maximum price.
C08 = 0 Force vend disable (default).
C08 = 1 Force vend enable.
C09 MULTI VEND
This parameter enables or disables automatic escrow process:
C09 = 0 Multi Vend disable (you obtain automatically the escrow after the selection)
(default)
C09 = 1 Multi Vend enable (you can make multi vend, when you want escrow, you
have to press the escrow button)
C10 BILL ESCROW MODE
This parameter allows the escrow of bill. If enabled and the last bill inserted takes the
credit over the maximum price, the bill will be held in the escrow position, and can be
returned as escrow. If the function is disabled, bills go always to the stacker. The valid
values are:
C10 = 0 Bill escrow enabled (default)
C10 = 1 Bill escrow disabled.