Sandel ST3400H HeliTAWS, Руководство по установке

Страница: 29 / 112

•
The workload on individual crewmembers.
•
The accessibility and ease of operation of necessary controls by the appropriate
crewmember.
4.3.3 Assembly and Mounting Instructions
Refer to the ST3400H Installation Drawings for specific assembly and mounting instructions
and appropriate notes.
4.3.4 Mounting Locations
The ST3400H may be installed as a replacement for or in a location provisioned for a radar
altimeter or other suitable location as defined as follows:
NOTE: Any installation location is acceptable provided the ST3400H is installed
adjacent to the helicopter primary displays (no greater than 6" between the edges of
the bezels) , its display and annunciations are visible to the pilot, and its controls are
reachable by the pilot or are suitably remote controlled.”
Reference drawing 82046-0177 for acceptable installation location criteria.
The following views identify approved mounting locations for installation of the ST3400H.
If it is desired to install the ST3400H in locations other than described herein, additional FAA
approvals may be required.
82046-IM-K ST3400H INSTALLATION MANUAL Page 4-2