S&C PureWave AVC Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 24

S&C PureWave AVC Скачать руководство пользователя страница 3

3

656-500

SAFETY INFORMATION

Understanding Safety-Alert
Messages

There are several types of safety-alert messages which may appear
throughout this instruction sheet as well as on labels attached to the
PureWave AVC. Familiarize yourself with these types of messages
and the importance of the various signal words, as explained below.

Following Safety Instructions

If you do not understand any portion of this instruction sheet and
need assistance, contact your nearest S&C Sales Office or S&C Autho-
rized Distributor. Their telephone numbers are listed on S&C’s web-
site www.sandc.com. Or call S&C Headquarters at (773) 338-1000; in
Canada, call S&C Electric Canada Ltd. at (416) 249-9171.

Replacement Instructions and
Labels

If you need additional copies of this instruction sheet, contact your
nearest S&C Sales Office, S&C Authorized Distributor, S&C Head-
quarters, or S&C Electric Canada Ltd.

It is important that any missing, damaged, or faded labels on the

equipment be replaced immediately. Replacement labels are available
by contacting your nearest S&C Sales Office, S&C Authorized Distrib-
utor, S&C Headquarters, or S&C Electric Canada Ltd.

Ç

DANGER

“DANGER” identifies the most serious and immediate hazards
which

will likely

result in serious personal injury or death if

instructions, including recommended precautions, are not
followed.

Ç

WARNING

“WARNING” identifies hazards or unsafe practices which

can

result

in serious personal injury or death if instructions, including recom-
mended precautions, are not followed.

Ç

CAUTION

“CAUTION” identifies hazards or unsafe practices which

can

result

in minor personal injury or product or property damage if instruc-
tions, including recommended precautions, are not followed.

NOTICE

“NOTICE” identifies important procedures or requirements that

can

result in product or property damage if instructions are not fol-

lowed.

NOTICE

Thoroughly and carefully read this in-
struction sheet before installing your
S&C PureWave AVC.

«
1
2
3
4
5
...
»

Содержание PureWave AVC

























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды