4.22 Define Log Interval
When the log function is set “2” (username,0000,21,
2
), you will have to define the number of
position data. Please refer to following command setting.
(Log function is for CT-58F version only)
Setup format
:
#
「
username
」
,
「
Password
」
,
「
20
」
,
「
Number of logged times recorded
」
*
Example
:
#username,0000,20,10*
The table 4.22.1 describes the meaning of each segment in the message above.
The table 4.22.2 shows each confirmation message reply after setup.
Text Keyed In SMS Description
#
Start sign.
username
Default ID of CT-58.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
20
Function code
10
When 10 or other defined number of data has completely logged, at the
same time, the data will be sent back to assigned router if GPRS is
checked to be available. Default is
2
*
End sign.
Situation
Message Reply
Setup Succeeds
Username, setup OK. Device log report time is updated
Incorrect function code
Username, log setup fail.
Incorrect username or
password
[username] + Username or Password error
Incorrect function code
[username] + command error