4.19 Set up TCP/ UDP Address to Transmit Data
If the user define to send the report to the TCP or UDP, please setup the TCP or UDP’s address by
below command.
Setup format
：
#
「
username
」
,
「
Password
」
,
「
Function Code
」
,
「
TCP/ UDP address: port number
」
*
Example
：
#username,0000,18,202.39.31.179:1337*
The table 4.19.1 describes the meaning of each segment in the message above.
Table 4.19.1
The table 4.19.2 is showing each confirmation message reply after setup.
Table 4.19.2
Text Keyed In SMS Description
#
Start sign.
username
Default ID of CT-58.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
18
Mode 4 defines to setup TCP/ UDP’s address
202.39.31.179
TCP or UDP’s address
1337
Port number
*
End sign.
Situation
Message Reply
Setup Succeeds
[username] + Device TCP/UDP is updated.
Setup Fail
[username] + IP/Domain setup Fail!
Incorrect password
[username] + Password setup Fail!
Incorrect username or command
format
[username] + command error
CT-58 is in Emergency Mode
[username] + in emergency, IP/Domain setup is not allowed.
