4.8 Acquire Report of Current Position
You can send the SMS according to the example shown below. It will transmit current data to the
web server (URL) at once.
Setup format
#「
username
」
,
「
Password
」
,
「
Function Code
」*
Example
:#
username,0000,10
*
The table 4.8.1 describes the meaning of each segment in the message above.
Table 4.8.1
The table 4.8.2 shows each confirm message reply after setup.
Table 4.8.2
Text Keyed In SMS Description
#
Start sign.
username
Default ID of CT-58.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
10
Mode 10 defines to transmit current data to the web server at once.
*
End sign.
Situation
Message Reply
Setup Succeeds
[username] + Polling OK!
Setup Fail
[username] + Polling Fail!
In mail mode, the setup parameters
are empty
[username] + Mail address or SMTP server parameter is
empty
Incorrect password
[username] + Password setup Fail!
Incorrect username or command
format
[username] + command error
Note that the message reply shown in Table 5.8.2 will only be sent back to cell phone that sent the
SMS to do configuration. The caller’s ID of cellular phone must be activated in order to let the
CT-58 recognize the caller ID and response accordingly.