Samyung NAVIS800FS, Инструкция по эксплуатации

Страница: 76 / 104

76
Satellite Info. Item Input Range Description
1.Initial Pos. LAT: 90°N ~ 90°S
LON: 180°E ~
180°W
User can set up the information on the own ship position.
Ex) When cannot receive GPS, DGPS
signal, the information on the current position of own ship can be
input.
2.Date/Time Set Date, Time User can set up the information on the weather and time
eg) In case of not being capable to receive GPS, DGPS signal,
the information on the current date and time can be input.
3.UTC Correction
±00:00 ~
±23:59
User can set up the local time differences.
In inputting '00:00' , it means Universal Time Chart(UTC) and "U"
is indicated at the next to the plotter screen. In inputting 'Local
Time Differences', it means the current time of the area and "L" is
indicated at the next to the plotter screen. For Korea,+09:00
should be input.
4.Setting 12/24 12Hour/24Hour User can set up the indication way of 24-hours or noon/afternoon
12-hours time system.
5.Speed Mode
Low/Mid/High Average ship speed can be set up.
Normally
‘Mid’
speed is selected.
6.DGPS Mode Auto/Manual/
WASS
Auto : It sets up the beacon frequency, scanning all the
frequencies of DGPS satellite-navigational correction standard
station.
Manual : Beacon frequency and speed can be manually set up.
WASS : It calculates the more preciseness than DGPS does,
with the same antenna, receiving the position signal and the
position information signal received from each difference
channel.
In selecting
‘Manual’
, the beacon frequency and speed should
be respectively input
Frequency : The frequency of the nearest DGPS satellite-
navigational correction standard station from the current
position
Speed : Communicational speed of the main controller of the
beacon controller and DGPS antenna can be input.
7.Antenna Height
-1000 ~ +999 The height from the sea surface to GPS antenna can be set up.
Normally it is set up at 10m.
8.Datum Set
Selection Range
Available
The geodetic can be set up to match the measured lat/log. with
the lat/log. of the chart.
[ Ref. ]
☞
How to move the selection menu of the geodetic
In moving to select the geodetic, move ( ) buttons up & down in
a unit , press, ( )buttons to move up & down in four units .