Samyung NAVIS800FS, Инструкция по эксплуатации

Страница: 68 / 104

68
2.3 Own Ship Set
With this function, it is available to set up a variety of information on the own ship.

Press ( ) button and move [2.SET]

[3.OWN SHIP SET].

Use the directional buttons, ( ) button,
( )
button to set up every items shown
below.
Setup Items Input Range Description
1.AUTO CENTER ON/OFF To indicate that the own ship is in the very center of the
display all the time.
2.SHIP MARK SIZE Large/Small To set up the size of the own ship shown in the display.
3.RADIUS SET 0.00 ~ 9.99 A function to indicate the radius in red circle, making the
own ship as a staring point. This is beneficial when the
own ship passes by any area of many islands or passes
by any narrow waterways.
It is normally set up at 1.00 NM or 0.5 NM. 0.00 NM is
advisable in case of OFF.
4.SMOOTHING SET The set up differs
from
the vessel
type. If the status of GPS receipt or the
measured position value are poor, this function can work
on smoothing the widely changing values of the lat/log,
ship speed, bearing, finally to display them.
The more value it is set up, the more stable it is as the
stronger smoothing is achieved.
5.LAT/LON
CORRECTION ±00.00 ~
±99.99 If any value error of the current position, the log/lat. can be
corrected per second, minute with this function.
6.
HEADING DISPLAY
ON/OFF This function displays the bearing line on the screen.
7.HEADING SIZE Small/Mid/Large To select the bearing size on the plotter display.
8.HEADING COLOR Red/Green/Blue To select the bearing color on the plotter display.
9.HEADING SHAPE Thick/Thin To select the bearing line thickness on the plotter display.