Samyung NAVIS800FS, Инструкция по эксплуатации

Страница: 69 / 104

69
[ CAUTION ]
☞
HOW TO SET UP SMOOTHING
The position of the vessel, speed, and direction can fluctuate due to the vessel type and speed. Refer to the
below and set up smoothing.
1. In case the vessel speed is low :
In case vessel speed/Direction fluctuate, increase the value more.
2. In case the vessel speed is high :
Set up the smoothing low and vessel speed/Direction changes fast.
<Illustration of smoothing value>
Vessel speed
Pos.
[position]
Spd.
[vessel speed]
Crs.
[Direction]
[speed mode]
2~5knots 0 080~130 70~90 Low speed
5~10knots 0 020~100 20~70 Low speed
10~15knots 0 010~030 10~20 Mid. speed
Above 15 knots 0 000~001 00~01 High spee
[note]
☞
Position smoothing value can be zero.
The above table is basic value based on vessel speed and , according to navigation condition, adjust the
value so that the change of speed and direction is optimum condition.
3. [5.Speed Mode] set up
Press the button as below and the speed will change to [High speed],[Mid. speed],[Low speed] ,then choose
the speed.
( )

( )

( )

( )

( )

( )
4. [4.Smoothing set]
Press the button as below.
( )

( )

( )

( )

( )

( )

( ) [5.Speed
Mode]

Enter vessel speed using [Number button]

( ) Direction value mode

Enter direction
value using [Number button]

( ),
☞
The Range : Position (0~9), Speed(000~399), Direction(0~99)