Samyung N560, Инструкция по установке и эксплуатации

Страница: 27 / 68

Installation and Operation Manual
27
3-4-12 Distance and bearing calculator
The unit can show the bearing and the length
of leg and the total distance of legs.
Setting Legs
1 In the chart window, press and
select Distance . Information is displayed
on window showing bearing/leg
distance/total distance at bottom pop up
at the bottom left side
2 Move the cursor to the start point which is
start point of first leg and press .
3 Move the cursor to a point which is the end
of first leg.
4 Repeat 2-3 steps for more legs.
5 Press to exit.
Deleting the last leg
1 Press and select Remove .
2 Repeat above step if you want to remove
more legs.
Saving as a route
1 Once you set all the legs, press and
select Save .
2 Enter a route name by pressing or
to select a letter then press for next
letter.
3 Press to save the new route.
Tip: Bearing and distance
3-4-13 Projected course
The projected course shows you how far it
can go at give time and speed.
This function is very useful to avoid collusion
with other vessels.
Projected position
Boat‟s projected course
Boat position