Samyung N560 Скачать руководство пользователя

Страница: 47 / 68

Installation and Operation Manual

4-2 Chart Settings

To go to the chart settings:
1 Press and hold

2 Select the chart icon.

4-2-1 Rotation

Three types of display presentations are

provided. The default is heading up.

North up:

North is at the top of the display.

Heading up:

When course is set, the course

is at the top of screen all the times.

Course up:

When destination is set it is at

the top of the screen. This option is only

available when you are navigating to a
destination.

4-2-2 Palette

Palettes are used to enhance the visibility of
the display depending on the surrounding

light environments. Four types of displays are

provided; Normal, NOAA, Sunlight and Night.

4-2-3-1 General(C-MAP)
Plotter mode:

this mode allows you to

zoom in and out at scales where cartographic

data are not available.

Mixing levels:

when the map coverage at

the current chart scale does not fill the entire

display, the GPS chart plotter draws the rest

of map using charts from above and below
the current scale. When this function is

turned on you will notice the display may
redraw 2 to 3 times to show all the detail.

AntiClutter:

when this option is selected,

less important information (names & icons)
are hiden when they are overlapped.

Value added data:

The Value Added

Data(VAD) is a collection of additional

cartographic objects which are not present on
the original paper chart. These objects have

been obtained from other sources and then

merged to the electronic charts in order to
provide more information useful for the

navigation.

Lat/Lon Grid:

Turns the displaying of the

latitude and longitude grid lines on or off on

the chart window.

S-MAP

C-MAP

Содержание N560





































































Результаты поиска

Содержание N560

Отзывы:

Похожие инструкции для N560

Бренды по названию

Популярные бренды

Samyung N560, Инструкция по установке и эксплуатации

Результаты поиска

Содержание N560

Отзывы:

Похожие инструкции для N560

Бренды по названию

Популярные бренды