Samyung N560, Инструкция по установке и эксплуатации

Страница: 26 / 68

Installation and Operation Manual
26
3-4-9 Going to a waypoint or to a point on the chart
A waypoint is a particular location on a voyage whether it is a starting, intermediate or
destination point. A waypoint is the simplest piece of information your equipment requires to
get you to a destination. In the shortest distance possible. This unit can save up to 10,000
waypoints.
Goto Cursor Option
1 Press and select the Chart window.
2 Move the cursor to the destination point.
3 Press
and select Goto cursor to
start navigating.
Goto WPT Option
1 Press and select the Chart window
2 Move the cursor to place cursor on a
waypoint.
3 Press and select Goto WPT to start
navigating.
Find Option
1 Press and select the Chart icon.
2 In the Chart window, press and
select Find then Waypoints .
3 select a waypoint to start navigation.
Make sure the course does
not pass over land or
dangerous waters.
Cancelling navigating
1 Press and select the Chart icon.
2 Press and select Cancel Goto .
3-4-10 Following a route
Often a trip from one place to another involves several course changes, requiring a series of
route points (waypoints) which you navigate to, one after another. The sequence of waypoints
leading to the ultimate destination is called a route. You can save up to 100 routes and a route
may consist of 100 waypoints.
Start Route Option
1 Press and select the chart window.
2 Press and select Start Route .
3 Move cursor keys to select a route to start
navigating.
4 Select Forward or Reverse to decide
which direction you want to navigate.
Route Window Option
1 Press and select the routes window
2 In the route window, mover the cursor to
highlight a route you want to start
navigating to.
3 Press and select start
4 Select Forward or Reverse to decide
which direction you want to navigate.
Create Route Option
1 Press and select the chart window.
2 Select New route .
3 Name a route name.
4 Move cursor keys to select a waypoint.
(Repeat this step as much as you need)
5 Press and select Add .
6 Press .
7 Repeat 2-4 steps of Route window option.
Skipping a waypoint
1 Press and select the chart window.
2 Press and select Skip .
3 Repeat above step if necessary.
Cancelling a route
1 Press and select the chart window.
2 Press and select Cancel route .
3-4-11 Goto Key
This key is very useful when you desire to
start navigating to a destination point. When
the key is pressed, it starts navigating to the
point of the cursor or Route. Going to a point
1 Move the cursor to an open position.
2 Press
.