7
➜
After setting the
mode to
➜
Rotate the channel
dial to select the desired channel.
1-3-2
FREQUENCY INPUT
➜
➜
After setting the
mode
➜
Rotate the channel
dial to move to the channel, in which there is no input of frequency
➜
Repeatedly press
on the front panel of keyboard and select [TX].
➜
Press
KEY to input
desired frequency.
[Ref.] If frequency is out of range, frequency cannot be input with
‘
beep
’
alarm sound.
[Ref.] Press the button
, put on [TX] and if you press
, you can change the
frequency with the dial from 10Hz to 10MHz by selecting it with the buttons
,
.
[Ref.] In CH1~ CH32 there is no frequency change and it applies from CH33 ~ to CH40.
1-3-3
CALL
➜
➜
TO : ---------
➜
➜
DIRECT INPUT
➜
➜
Input the other party's MMSI
➜
➜
Frequency selection
➜
➜
MODE selection
➜
➜
COMM Frequency selection
➜
Press
.
1-3-4
DSC MESSAGE RX AUTO REPLY
➜
➜
mode selection
➜
➜
[1. DSC SETUP]
➜
➜
[4.AUTO ACK SET]
➜
1. AUTO ACK TEST: ON , 2. AUTO ACK POLLING : ON ,
3.
AUTO POSITION: OFF , 4 . AUTO ACK INDIVIDUAL: ON
