97
After
‘②’
choose [3. Collective FEC Receiving]
choose [On] or [Off] by [Enter]
return and saved to Main Menu by pressing [ESC].
ⓔ
setting [4. Maximum FEC Error Ratio]
-
If error rate is higher than setting value, when FEC Mode receiving, receiving
will be stopped.
(example, if error rate is set to 30% and receiving error rate is more than
30%, then receiving will be stopped.)
-
setting
after
‘②’
choose [4. Maximum FEC Error Ratio]
[Enter]
input [number]
[Enter]
return and saved to Main Menu by pressing [ESC].
[ Ref. ]
☞
input value range is 1~100.
ⓕ
Setting [5. NAVTEX Station Selection]
-
Allow receiving NAVTEX signal and by the initial character of the broadcast
name from A ~ Z by [right, left button].
-
The way of setting
After
‘②’
choose 5. NAVTEX Station Selection]
[Enter]
NAVTEX
Station Selection will appear.
Choose initial character of the broadcast
station by [left/right arrow button] and [Enter]
save and return to System
setting Menu by pressing [ESC]
•
O : NAVTEX recognized as receivable broadcast station name.
•
X : NAVTEX recognized as non-receivable broadcast station.
ⓖ
setting [6. NAVTEX Message Selection]
-
Allow receiving NAVTEX message from C, E ~ Z by choosing initial character
by [left / right arrow button].
-
The way of setting
After
‘②’
choose [6. NAVTEX Message Selection]
[Enter]
NAVTEX
Message Selection will appear
choose initial message character by
[left/right arrow button] and [Enter]
save and return to System setting
Menu by pressing [ESC]
•
O : recognized as NAVTEX beginning message.
•
X : not recognized as NAVTEX beginning message.
[ Ref. ]
☞
A, B, D are always set receivable.
ⓗ
setting [7. NAVTEX ID Data Clear]
-
Delete received NAVTEX broadcast ID.
-
The way of setting
