71
5) Press
to send a POSITION call, wait for the response at transmitted
frequency.
6) When a response is received, an alarm sounds and an alarm window is displayed.
If you press
the alarm window disappears and the alarm stops. It is
displayed after the response in the upper right corner of the screen. Depending on the
response, the location information may or may not be included as follows.
<When there is no location information><When there is location information>
8-4-2
RECEPTION REQUEST CALL FOR LOCATION
INFORMATION
1) Set up an auto response
It is possible to set a function to respond automatically when receiving a request call for
location information.
➜
➜
[1.DSC SETUP]
➜
[4.AUTO ACK SET]
➜
You can turn it ON in
[3.AUTO ACK POSITION: ON].
※
When AUTO ACK is ON, when receiving a call request for location information, a call
response is sent without displaying the alarm sound and alarm window on the
screen, the POSITION DSC receiving screen is also not displayed.
2) Send a manual response
①
There are [ACCEPT] / [REFUSE] types when sending a manual response.
※
Only REFUSE can be sent if the device does not have location information
Press the key
to respond with the received DSC frequency immediately and
transmit the location information and time of the equipment.
If you press
, it responds with the received DSC frequency and transmits the
position information and time with NO INFO. TASK is automatically completed after the
response.
