65
4-9-1 Simulate
Simulate :
Turn the simulate mode on or off.
Mode :
See 2-5 Simulate Mode.
Speed :
The simulated boat speed to use.
Course :
The simulated course over ground.
Route :
The route to follow.
4-9-2 Waypoint
Select a way to display waypoints.
4-9-3 GPS
See 4-4 GPS Settings.
4-9-4 Video
Select the method of Video transmission
method.
4-9-5 Units
Select a unit of each measure.
Tip:
Requires a optional VHF receiver
with barometer connected
:
InHg or mB.
4-9-6 Comms.
Use this function only when it has been
connected to the marine communication
equipment through compatible NMEA. you
may transmit NMEA data to other marine
communication equipment. NMEA. NMEA
interface is the made by following
international standard which requires to be
compatible with other marine communication
equipment.
Select the Port(NMEA0183-Por1,
NMEA0183-Port2, NMEA2000) and
Transmission speed and select the demanded
output information.
4-9-7 Calibrate
Speed
: Correct the speed errors
Speed filter
: Apply the corrected value of
speed errors
Temperature
: Correct the water
temperature errors.
Temperature filter
: Apply the corrected
value of water temperature errors.
Keel’s displacement:
Able to fix the
depth’s error.
Speed range
: Able to set the speed range
4-9-8 Time
Local offset :
The time information supplied
by the GPS satellites is in UTC (Universal
Time Coordinates). To read the correct time,
change the time of GPS chart plotter for
daylight saving time start and end.
Time format :
Select the format of time.
Date format :
Select the format of date.
4-9-9 Cursor size
You can adjust the size of the cursor.
4-9-10 Cursor speed
You can adjust the speed of cursor.
4-9-11 Vessel size
You can adjust the size of the own vessel.
4-9-12 Electronic buoy
When electronic buoy has been connected,
when you press it will take you to the
Electronic Buoy page, not the Data
page. When you press menu, you may
use individual call, display indication,
Line indication or delete.
4-9-13 Restore default
Returns every other setting to default
User Guide
66
Accurate installation highly affects the performance of this equipment. You must read the
manual on installation, antenna and other equipment information before installation process.
For information on the additional equipment, contact SAMYUNGENC and check.
①
HDMI
: Use HDMI connection cable, connect external monitor
②
ETHERNET
: .
③
MEDIA
: CCTV, S-VIDEO, external speaker, mic connect (Use optional MEDIA cable)
④
DATA
: DGPS, NMEA2000 (Use optional Y cable)
⑤
SONAR
: Connect 201B45 transducer.
⑥
REMOTE
: Connect the external remote control REM-3D .
⑦
POWER&DATA
: connect 11~36V DC power supply, NMEA0183, external alarm
⑧
External GPS
: Connect SAN-60 .
5-1 OPTIONAL PART
Optional sense and equipment
• External alarm
• GPS or DGPS antenna
• Transducer
• MEDIA cable
• Y cable
• DSC VHF wireless communication
equipment
• NMEA2000: Equipment can display the
engine information and Trim information.
• Others: Other equipment may input the
information to this equipment, and the
other way around.
Connection part
5 CONNECTIONS
①
②
③
④
⑤
⑥
⑦
⑧
