Samyung ENC NCD-2256, Инструкция по эксплуатации

Страница: 94 / 192

68
Chapter 5 VARIOUS FUNCTION ICONS
5.11.3 SYMBOL MARKER
To use this function, ship
’s heading and position information are required.
To use the “Symbol marker” function, GPS signal input is necessary because symbol position is memorized
as a latitude and longitude data. If no GPS signal is input, you cannot select “Symbol marker” function.
You can select the following symbols.
Cross-symbol1
Cross-symbol2
Y-symbol
Sandglass-symbol
①Flick on the touch panel.
②Resident icons appear.
Flick on the touch panel again. ③All icons appear.
Tap
icon.
④Mark menus appear.
Tap “SETTING” bar.
⑤Mark Setting menus appear.
Tap “MARK1” bar.
⑥ Tap the “×”bar to apper
⑦You can mark a symbol
on the screen.
You can change the color and size of the markers.
You can undo and redo the markers.
You can delete all the markers by tapping the clear bar.
You can select a marker to display by tapping the view menu bar.
The maximum number of markers is 2000 points (The total of
MEMO and LINE and SYMBOL MARKER).
The Markers that you inputted is memorized even after the
indicator turned off.