Samwon Tech 3ch series Скачать руководство пользователя страница 37

Страница: 37 / 181

SAMWONTECH

2nd Edition of TEMP2000M_Series IM : April. 8. 2014 Page 33 / 176

3.2.2 Stationary operation the 1

operation screen

▶

It is the screen for measured data, setting data, control output quantity and lamp operation state.

▶

The setting data input key is displayed when the “Setting data” is touched during operation.

①

It displays the current operation status. .

②

It displays current setting data.

③

It displays the current measured data.

④

It displays the current setting data of the sub channel.

⑤

It displays the current measured data of the sub channel.

⑥

The “ON” state of the state lamp is displayed in red and “OFF” state is in dark grey.

☞

The state lamp can be set in [Fig. 21-3 System initial setting screen].

⑦

The No. of PID group is expressed which is being adopted currently.

☞

The adopted PID group can be checked in [18. PID group].

⑧

It displays the current date/time and the LCD screen is OFF when it is pressed.

☞

The red lamp is ON when the date/time button is pressed in the operation still screen.

☞

The green lamp is ON when the date/time button is pressed on the operation screen.

⑨

It moves to the [Fig. 3-1 Main screen].

☞

The key pad to input the password is displayed in case of main button restriction setting.

⑩

It moves to the next screen from current screen.

⑪

It performs or releases the auto tuning with current setting data.

☞

The Y/N of the tuning button display can be set in [18. PID group].

⑫

The main, sub (Sub channel) is selected for performing the auto tuning.

⑬

It is the user button.

☞

The Y/N button for use can be set in [21. System initial setting].

☞

When the user button is used, the relay wanted by user can be set and used in the [13. DO Relay
setting]

Ex) It is used for ON/OFF of chamber output ON/OFF.

☞

The set relay is operated when the “User” button is pressed in the stationary and program
still/operation screen.

⑭

It displays the stationary operation processing time.

⑮

It is a button for operation/stop.

③

⑦

⑤

⑧

②

⑨

⑩

⑪

⑬

⑮

[Fig. 3-4]

Stationary operation the 1

operation screen

-1

①

④

⑭

⑫

⑥

Содержание 3ch series






















































































































































































Результаты поиска

Содержание 3ch series

Отзывы:

Похожие инструкции для 3ch series

Бренды по названию

Популярные бренды

Samwon Tech 3ch series, Инструкция по эксплуатации

Результаты поиска

Содержание 3ch series

Отзывы:

Похожие инструкции для 3ch series

Бренды по названию

Популярные бренды