Searching for Music/Voice Files
Recording MP3s
✽
To move to other modes from the LINE_REC mode,
refer to page 47 "Changing Mode"
- Bit Rates can be set within the range of 32Kbps~192Kbps.
- Beeps are disabled while recording.
- Recording is allowed only when there are 1MB or more of free memory .
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
- VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according
to the type of sounds, such as their pitch, in the file.
- When playing a VBR file, you cannot move to and play the previous track even if you push
the
“M”
button to the position within 3 seconds after playback starts.
- Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
- Do not disconnect the Line cable during Recording.
- If the battery is not sufficiently charged, the player will not completely encode the file.
- Adjust the volume of the external audio source to a suitable level and recode it.
If the volume level is too high, the sound quality may be poor.
N
N
N
N
o
o
o
o
tt
tt
ii
ii
cc
cc
e
e
e
e
43
42
1
Connect the Audio Output port
on the external audio source
(or the Line Out port) to the
ENC port on the device with
the Line cable.
●
Press the play button on the external
device to play the music to record.
2
Press and hold the REC button to start MP3 recording.
●
If the button is pressed, recording is paused and if the button is pressed again,
the recording resumes.
3
If the REC button is pressed during recording, the recording stops and an
MP3 file is created.
●
The files are recoded in the order of L001, L002....
and saved as MP3 file in LINE_REC folder after recording.
ENG
●
Push and hold the “M” button left or right during playback to search for
the a specific section of the music file you want to listen to.
●
Release the “M” button to resume play normally.
To search for specific parts during play
●
Push the “M” button to the position briefly during playback to play the next track.
●
Push the “M” button to the position briefly within 3 seconds after playback starts,
to move to and play the previous track. Push the “M” button to the position
briefly after 3 seconds to play the current track from the beginning.
To change tracks during play
●
Push the “M” button left or right in stop/pause mode to move
to the previous/next track.
To change tracks when stopped/paused
T7 AME ENG inlay 1/14/05 18:2912:0 Page 42
