Chapter 7. Playback Settings
62
Pre-amp.
This allows you to adjust the volume when replaygain is applied. Replaygain
often lowers the volume, sometimes quite much, so here you can compensate for
that. Please note that a (large) positive pre-amp setting can cause clipping, unless
prevent clipping is enabled. The pre-amp can be set to any decibel (dB) value
between -12 dB and +12 dB, in increments of 0.5 dB.
7.10. Track Skip Beep
Controls the volume of the beep that is heard when skipping forward or backward be-
tween tracks. The beep is disabled when set to
Off
.
7.11. Auto-Change Directory
Control what Rockbox does when it reaches the end of a directory. If
Auto-Change Di-
rectory
is set to
Yes
, Rockbox will continue to the next directory. If
Auto-Change
Directory
is set to
No
, playback will stop at the end of the current playlist. Using
the
Random
feature requires you to first generate a folder list via the Random Folder
Advance Configuration plugin (see section
(page
Note:
You must have the
Repeat
option set to
No
for
Auto-Change Directory
to
b
function properly.
Note:
This feature only works when songs have been played from the file browser. Using
b
it with the database may cause unexpected behaviour.
7.12. Constrain Auto-Change
If enabled and you have set
Start File Browser Here
to a directory other than root,
Auto-Change Directory
will be constrained to the directory you have chosen and
those below it. See section
(page
7.13. Last.fm Log
Enables logging of your played tracks for submission to
. This service
was formerly known as
Audioscrobbler
. When you enable this option, you’ll have to
reboot to start the logging. The log-file is called
.scrobbler.log
,and is to be found in
the root directory of your player.
Note:
See
for a further description, and for tools you can use to submit
b
your Last.fm log.
The Rockbox manual
(version 3.14)
Samsung YH-920