VCR Setup
10
Manually Setting the Clock
1
Press the MENU button on the remote control.
Press
▼
and
❿
to select “CLOCK SET/ADJUST.”
2
Use
▼
and
❿
on the remote control to select MANUAL.
3
The first clock setting display appears.
To enter the current time, press
▼
or
▲
and press
❿
to
move to the the next setting.
4
To enter the current month and date, press
▼
or
▲
and
press
❿
to move to the next setting.
5
To enter the current year, press
▲
or
▼
.
The day of the week is automatically added after you set
the year.
6
Press the MENU button to start the clock.
Press the MENU button again to exit the Main Menu.
MAIN MENU
Timer recording
❿
Clock set/adjust
Channel setup
VCR function setup
Language/Lengua/Langue
[
❷
%
/
❿
]
[MENU/EXIT
]
CLOCK SET/ADJUST
AUTO
❿
MANUAL
Select [
❷
!
%
!
] and press [
❿
]
[
❷
%
/
❿
]
[MENU/EXIT
]
CLOCK SET/ADJUST
CLOCK SET/ADJUST
P
M
CLOCK SET/ADJUST
P
M
TIME DATE YEAR
12:00 1/01
2000 SAT
[
❷
%
!
/
➛❿
] [MENU/EXIT
]
A
M
TIME DATE YEAR
9:00 5/05
2001 SAT
[
❷
%
!
/
➛❿
] [MENU/EXIT
]
TIME DATE YEAR
9:00 5/05
2001 SAT
[
❷
%
!
/
➛❿
] [MENU/EXIT
]
VCR Setup
11
The VCR has an internal clock which is used to turn the VCR on and off for timer recording.
Automatically Setting the Clock
When the AUTO CLOCK SET feature is selected, the VCR automatically updates its internal clock using
Coordinated Universal Time information transmitted by some broadcast stations. If the VCR is connected to a
Cable or DSS
®
box, box setup must be completed first (see page 7) and is activated when the Cable or DSS is
tuned to the PBS channel.
1
Press MENU on the remote control. Press
▼
and
❿
to select “CLOCK SET/ADJUST.”
2
Press
❿
to select AUTO.
3
Clock Data CH : If you select AUTO, the VCR will
automatically tune to a channel providing time data.
This may take the VCR up to 10 minutes. You can
also tune the VCR manually to a channel that you
know carries time information (PBS channel) with
the
➛!❿
buttons.
Time ZONE : If you select AUTO for your time zone,
the VCR sets the clock using the first Coordinated
Universal Time information it finds. If the time is not
correct, select another time zone.
Daylight Savings Time : If you select AUTO, the
VCR sets the clock using the DST information
broadcast in the signal (channel). If you select YES,
Daylight Savings Time is observed:
Spring : The clock changes forward one hour on the first Sunday in April.
Autumn : The clock changes back one hour on the last Sunday in October.
4
Press the MENU button when you finish setting the
clock. If you selected AUTO CLOCK, the VCR clock
will be set automatically when the VCR is turned OFF.
If AUTO CLOCK SET is unsuccessful, check local station listings for channels with Coordinated Universal Time.
Tune the VCR to one of these channels, and turn the VCR off. If the time does not set within 5 minutes, set the
time and date manually.
NOTE : The auto clock set function checks the time at 9PM every day in the power off mode.
If the VCR is in the Clock Set MANUAL mode, auto clock set doesn’t work.
MAIN MENU
Timer recording
❿
Clock set/adjust
Channel setup
VCR function setup
Language/Lengua/Langue
[
❷
%
/
❿
]
[MENU/EXIT
]
CLOCK SET/ADJUST
❿
AUTO
MANUAL
Select [
❷
!
%
!
] and press [
❿
]
[
❷
%
/
❿
]
[MENU/EXIT
]
CLOCK SET/ADJUST
❿
Clock data CH: [AUTO]
Time zone : [AUTO]
Do you observe [AUTO]
DST in summer?
[
❷
%
/
➛❿
] [MENU/EXIT
]
Setting the Clock
