Samsung VP-D101, Руководство по обслуживанию

Страница: 18 / 99

2-14
Alignment and Adjustments
Samsung Electronics
2-4-4 Mechanical Check and Adjustment
2-4-4(a) Tension Regulator Adjustment
1) Disassembly
Œ For the removal of the Housing Ass’y refer to 4-2-2 (Training Manual ; page 4-8).
2) Adjustment
Œ
Set to PLAY mode (without cassette tape).
´ Check that the distance between external surface of Holder Loading and extenal diamater of Arm Tension is
0.7±0.3mm. (Fig. 2-19)
ˇ If necessary, proceed to step 4.
¨ If the Arm Tension Œ is located inside (or right) the position specified, adjust the Cap Adjust Œ toward
arrow “A”. (If it is located outside (or left), adjust toward arrow “B”.)
Note : Check if the Arm Tension can be moved toward arrow “C” in PB mode.
3) Reassembly
Œ For the removal of the Housing Ass’y refer to 4-2-2 (Training Manual ; page 4-8).
Fig. 2-19
ARM TENSION
Œ
CAP ADJUST
´
"A"
"B"
"C"