Samsung VP-D101, Руководство по обслуживанию

Страница: 12 / 99

2-8
Alignment and Adjustments
Samsung Electronics
Fig. 2-9
ADJ ITEM
VCR ADJ
CAM ADJ
CODEC ADJ
PRML ADJ
CAM DISP
DSC ADJ
LCD/CVF ADJ
3) How to get into the LCD adjust mode
[STEP 1]
Œ
Connect the Power source.
´ Set the Power Switch to “CAM” position and Mode Switch to “TAPE” position.
[STEP 2]
ΠPress and hold the "STOP" and "PB ZOOM" buttons on the video camera at the same time for more than
5 seconds.
´
When “ADJ ITEM” OSD appears at the monitor as shown Fig. 2-9, move to a “ CAM ADJ” through
“Menu Dial” scrolling and press the “ENTER button”.
Fig. 2-10 will be shown in LCD screen and move to Address No. “012C” to adjust its value as “01”.
In order to save the modification value, press the “ENTER button” again.
(this is for setting up of Color Bar output.)
◆
After completing all of adjustment, the Value of Address No. “012C” must necessarily return as “00”.
ˇ Move a Power Switch to OFF.
(Don’t have to plug it out)
Fig. 2-8
DISPLAY Button
MENU Button
PB ZOOM Button
Mode Switch
Power Switch
EASY-Q Button
STOP Button
MENU Dial
ENTER Button
Fig. 2-10
CAMADJ EPR EVR
012C XX 01
Adjusted values [01]
Address values [012C]