Samsung ViasatHD DSB-H670N, Руководство пользователя

Страница: 188 / 211

32
DSB-H670N
D I G I T A L S A T E L L I T
TROUBLESHOOTING
Note Note : Bad weather can cause poor signal strength.
There might be a difference in output mode video image quality or video format
depending on TV Brand.
The device, packaging material (e.g. Styrofoam) and the batteries must never be disposed of with
household refuse. Please obtain appropriate information about the regulations in your community
and dispose of all refuse in accordance with regulations at the separate locations provided.
Disposal
You can download and upgrade the system software of the receiver through a specific channel
through a specific channel designated by the broadcaster. The Distributor will provide you with more
information about that.
Problem Possible cause Solution of the problem
No display LED on Power cord Power cord plug in correctly
the front panel; not plugged in correctly
No power supply
No pictures on the screen Receiver in Standby mode; Set receiver to “On”;
SCART cable is not connected Check connection;
to video output of television;
incorrect channel or video Check channel and video output
output selected on television (TV instruction manual)
No sound SCART or Audio cable connected Check connection;
incorrectly;
Volume level = 0; Increase Volume on television set;
Muting active Press the MUTE key
Remote Control does not Incorrect operation; Point remote control
operate directly towards the Receiver.
Batteries dead or inserted Replace batteries or insert correctly
incorrectly
TV mode was selected Press 'Viasat' Key on remote control
Poor picture quality Signal strength too low Check all wire connections
signal strength in
On-Screen Error Messages: Antenna cable not connected Check connection and correct;
“No signal” or not tight;
incorrect position of the antenna Check position and correct antenna;
Check the signal strength in
the “Installation Setup” menu
Receiver not yet set Scanning of in “Installation” menu