background image

Tro u b l e s h o o t i n g

Check this list of possible problems and solutions before bringing your vacuum to a service center.

Vacuum cleaner won't run.

Possible Causes

·

·

Power cord not firmly plugged in

·

·

Blown fuse or breaker

Remedies

·

·

Check electrical plug

·

·

Check/replace fuse - Reset breaker

Vacuum cleaner won't pick up dirt.

Possible Causes

·

·

Incorrect Height Adjustment

·

·

Hose not attached to suction opening

·

·

Crack or hole in Hose

Remedies

·

·

Adjust Powerfoot to correct height setting 

Grasp Quick Reach Handle and firmly push  Hose

·

·

Wand onto the suction opening

·

·

Check Hose and replace if needed

Vacuum cleaner won't pick up dirt continued.

Possible Causes

·

·

Broken or worn Drive Belt

·

·

Rotating Floor Brush bristles worn

·

·

Rotating Floor Brush jammed

·

·

Clog in vacuum

·

·

Dirt Container full

·

·

Dirt Container or Upper Tank not installed  

properly

·

·

Filters are dirty

Remedies

·

·

Replace Drive Belt, see pg. 9

·

·

Replace brush

·

·

Remove brush and clean debris from brush ends

·

·

Follow instructions on pg. 10 for clearing clogs

·

·

Empty Dirt Container

·

·

Position correctly and lock in place

·

·

Check and clean Upper Tank, Pre-Motor and Post-

Motor Filters

Tools won't pick up dirt.

Possible Causes

·

·

Crack or hole in Hose

·

·

Clog in vacuum

·

·

Dirt Container full

·

·

Dirt Container or Upper Tank not installed 

properly

·

·

Filters are dirty

Remedies

·

·

Check Hose and replace if needed

·

·

Follow instructions on pg. 10 for clearing clogs

·

·

Empty Dirt Container

·

·

Position correctly and lock in place

·

·

Check and clean Upper Tank, Pre-Motor and Post- 

Motor Filters

Vacuum cleaner is difficult to push.

Possible Causes

·

·

Incorrect Height Adjustment

Remedies

·

·

Adjust Powerfoot to correct height setting

Visible dirt escaping from cleaner.

Possible Causes

·

·

Dirt Container full

·

·

Filters missing or installed incorrectly

·

·

Dirt Container installed incorrectly

If suggested solutions do not correct the problem, call:

Remedies

·

·

Empty Dirt Container

·

·

Check Upper Tank, Pre-Motor and Post-Motor 

Filters for correct installation

·

·

Pull out and re-insert Dirt Container correctly

Esta aspiradora cumple las siguientes directivas
de EMC: 89/336/EEC, 92/31/EEC y 93/68/EEC
Directiva sobre seguridad en aparatos de bajo voltaje: 73/23/EEC y 93/68/EEC

DJ68-00148F  REV(0.2)

0870-SAMSUNG(726-7864)

Содержание VC-U366









Отзывы: