3
O p e r a t i o n
Dusting Brush Tool:
Use to dust furniture, blinds, books,
lamps, shelves, draperies, cushions.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachment for a
longer reach.
The cleaner can also be moved by
using the carrying handle.
2-4
2-5
A
B
C
Attachment tools can be used to clean
furniture or drapes, on stairs or in
corners. Place the vacuum on the floor
with the handle in the upright position.
2-1
2-2
2-3
1.To turn cleaner ON(
I
), press the
ON/OFF switch to the ON position.
2.To the cleaner OFF(
O
), press the
ON/OFF switch to the OFF position.
The handle of your cleaner has three
positions;
upright
for storage and
when using cleaning tools;
operating
for general operation on carpet and
floors;
low
for reaching under low
furniture. Step on handle release
pedal to lower handle.
To move your cleaner from room to
room, put the handle in upright
position, tilt the cleaner back on its
rear wheels and push forward.
CAUTION:
WARNING:
NOTICE:
While vacuuming, certain carpets
and low humidity conditions may
generate small static discharges.
The discharges are entirely
harmless and are not associated
in any way with the main power
supply.
NOTICE:
The Floor Brush will continue to
rotate while you use your vacuum
for above floor cleaning. To prevent
carpet damage, do not lean on the
vacuum or let the Powerfoot tilt
forward.
2. How to use you samsung vacuum
ON-OFF Switch
Carrying handle
Cleaning Tool attachments
Handle positions
Transporting cleaner
To maintain maximum cleaning
performance, the following
maintenance steps must be
performed:
Empty the Dirt Container when the
dirt reaches the “Full” line on the
side.
Check the Upper Tank and Pre-
Motor Filters monthly and clean or
replace as needed.
Clean or replace the Post-Motor
Filter every three months.
Note: More frequent filter
cleaning may be necessary if
you are vacuuming new carpet,
fine dust, or have allergy
concerns. Follow the
instructions on the following
pages to perform these simple
maintenance steps.
The Rotating Floor Brush continues
to rotate while tools are in use. To
reduce the risk of injury from moving
parts, always move the cleaner with
the Carrying Handle at the back of
the cleaner. Always place vacuum
cleaner on floor with Handle in
Upright position when using tools.
Never place your fingers under the
cleaner when it is running. Never
place Powerfoot on furniture or
uneven surfaces. Do not place
vacuum cleaner close enough to
objects to pull them into rotating
brush.
To reduce the risk of electric
shock, turn Power Switch OFF
and disconnect plug from
electrical outlet before
performing mainte- nance or
troubleshooting checks.
