84
The Schedule Recording/Timeshift Function Isn't Working
When Timeshift or Schedule Recording aren't working, these steps may help resolve the problem.
The problem
Try this!
Schedule Recording
cannot be
used.
Check if there is a USB device connected to the TV.
Recording will automatically stop if the signal becomes too weak. The
Timeshift function will not work if there isn't enough storage space on the
USB device.
(HDMI-CEC) Isn't Working
When (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem
Try this!
does not work.
Confirm that the device is an device. The system supports
devices only.
Check if the power cord of the device is properly connected.
Check the cable connections of the device.
Go to
(HDMI-CEC)
(
Settings
System
Expert Settings
(HDMI-CEC)
) and see if
(HDMI-CEC)
has been set to
On
.
Check whether the TV remote control is in TV mode.
Check whether the remote control is compatible.
may not function when some other functions are active, including
Channel Search, Smart Hub, Plug & Play, etc.
If you have disconnected and then reconnected the HDMI cable, scan for
devices again or turn your TV off and on.
I want to start .
Check if the device is properly connected to the TV, and then select
the
(HDMI-CEC)
(
Settings
System
Expert Settings
(HDMI-CEC)
) menu to see if
(HDMI-CEC)
is set to
On
.
I want to exit .
Set
(HDMI-CEC)
(
Settings
System
Expert Settings
(HDMI-CEC)
) to
Off
.
The message "Connecting
to device..." or
"Disconnecting from
device" appears on the screen.
You cannot use the remote control when the TV is configuring
or switching to a viewing mode. Use the remote control after the TV has
completed the configuration or has switched to a viewing mode.
The device won't
play.
You cannot use the play function when
Start Setup
is in progress.
The connected device is not
displayed.
Check whether the device supports .
Check whether the HDMI cable is properly connected.
Go to
(HDMI-CEC)
(
Settings
System
Expert Settings
(HDMI-CEC)
) and see if
(HDMI-CEC)
has been set to
On
.
Scan for devices again.
devices must be connected to the TV using an HDMI cable. Make sure
the device is connected to your TV with an HDMI cable. Some HDMI cables may
not support .
If the connection is terminated because there has been a power failure or the
HDMI cable has been disconnected, please scan for the device again.