Samsung SVR-1680 Скачать руководство пользователя страница 71

Страница: 71 / 97

User Manual

To change HDD usage to Yes

- Selecting "No" and pressing [ENTER] or using the mouse wheel will prompt the following

notice:

“

Warning: This disk can be used without formatting. Would you like to format this disk?

”

- Select "

" to preserve the data and enable the HDD usage.

- Select "

Yes

" to delete all data and enable the HDD usage.

To change HDD usage to No

- Selecting "Yes" and pressing [ENTER] or using the mouse wheel will prompt the following

notice:

“

Warning: The disk will be disabled.

”

- Select "

Yes

" to disable the HDD. A status message saying "Disk has been disabled" will

appear to the bottom of the screen.

- The HDD has been disabled.

- Select

“

”

at the warning message to continue HDD usage.

6.10.3 Security

There are two types of DVR users such as administrator and user and there is no limit to use

the DVR for the administrator. Maximum 10 users can use this device and authorization is

needed to use it.

Authority

The user can use the entire functions without limitation when all the configuration of

examinations at authority section are

“

”

Содержание SVR-1680


































































































Результаты поиска

Содержание SVR-1680

Отзывы:

Бренды по названию

Популярные бренды

Samsung SVR-1680, Руководство пользователя

Результаты поиска

Содержание SVR-1680

Отзывы:

Бренды по названию

Популярные бренды