Samsung SVR-1680 Скачать руководство пользователя

Страница: 47 / 97

User Manual

There are 5 options total: No Rec./Low/Standard/High/As Above

Event Recording

Press [ENTER] and use the left/right buttons or the mouse wheel to choose "Yes" or "No".

Advanced event recording conditions can be set in the Event Recording menu.

In this menu, only whether or not the function will be enabled can be configured.

6.6 Configuring Event Recording

This menu is used to configure event-triggered recording operations.

There are four types of event recording: Sensor, Motion Detection, Text and Digital Input. To

execute event recording, the relevant settings must be enabled under the Record Setup menu.

Once the recording conditions have been set, "Event Recording" under Record Setup must be

set to "On". Also, before configuring event recording, "Event Source" must be configured.

However, Digital Input event recording differs from the others in that it requires Macro to be set

to above "Low" also to activate.

6.6.1 Event Source Setup

The following explains how to configure sensor, motion detection and text for the purpose of

event recording.

6.6.1.1 Sensor Setup

This menu is used to configure sensor activity and sensor type.

Two types of sensors are supported: Normal Open (N.O.) and Normal Close (N.C.)

Configure the settings according to the type of sensor used.

Содержание SVR-1680


































































































Результаты поиска

Содержание SVR-1680

Отзывы:

Похожие инструкции для SVR-1680

Бренды по названию

Популярные бренды

Samsung SVR-1680, Руководство пользователя

Результаты поиска

Содержание SVR-1680

Отзывы:

Похожие инструкции для SVR-1680

Бренды по названию

Популярные бренды