Samsung SVR-1680 Скачать руководство пользователя

Страница: 44 / 97

User Manual

6.3.1.5 Brightness / Contrast

It can control Brightness & Contrast of image.

After pressing [ENTER], press the left/right buttons or the mouse wheel to choose between "On"

and "Off".

6.3.1.6 PTZ

This option configures settings regarding the PTZ device, including PTZ Home, Idle Time, Port

and Address.

6.3.1.6.1 PTZ Home / PTZ Idle Time

This menu is only relevant for cameras supporting the PTZ (Pan/Tilt/Zoom) feature. When

enabled, the camera will return to its preset home position after a period of PTZ idle time.

After pressing [ENTER], use the left/right buttons or the mouse wheel to select the home preset

position and idle time duration.

6.3.1.6.2 PTZ

Port

This menu is only relevant for cameras supporting the PTZ (Pan/Tilt/Zoom) feature.

After pressing [ENTER], use the left/right buttons or the mouse wheel to select the PTZ port of

the channel.

6.3.1.6.3 Address

This menu is only relevant for cameras supporting the PTZ (Pan/Tilt/Zoom) feature. After

pressing [ENTER], use the up/down buttons or the mouse wheel to configure the base address

of the PTZ device.

For detailed information on PTZ cameras supported by the product and their

advanced configuration settings, please refer to the relevant list under "7.4.9 PTZ

Usage".

6.4 Quick Recording Setup (Quick Setup)

The Quick Setup menu configures all analog channels with equal settings, abbreviating the

setup process.

Содержание SVR-1680


































































































Результаты поиска

Содержание SVR-1680

Отзывы:

Похожие инструкции для SVR-1680

Бренды по названию

Популярные бренды

Samsung SVR-1680, Руководство пользователя

Результаты поиска

Содержание SVR-1680

Отзывы:

Похожие инструкции для SVR-1680

Бренды по названию

Популярные бренды