Samsung SVR-1680 Скачать руководство пользователя

Страница: 31 / 97

User Manual

saying "Screen Locked" will appear and lock the screen. If the user password is set to "Off",

then a message saying "Enable user passwords first" will appear instead.

Screen Lock will block all button inputs; it must be disabled first to activate other functions.

Pressing any button in Screen Lock mode will prompt a user password screen. The

corresponding passwords will deactivate Screen Lock.

Chapter 5. Playback

5.1 Playback

5.1.1 Playback with Main Screen (16/9 division screen)

Press [PLAY] button or click

in the function menu with the mouse from the monitoring

mode.

Pressing [PLAY] or [FWD] will play the recorded data at 1x speed (default value).

Pressing [REW] will play the recorded data in the reverse direction at 1x speed (default

value).

Playing visual data in nine channels will limit the frame rate to 2 fps. Therefore,

the total frame rate of the nine channels will add up to 18 fps. With a single

channel, the frame rate will be limited to 30 fps.

Pressing [PLAY] from a monitor partition mode will play the data from 16 or 9

channels.

5.1.2 Playback Functions

PLAY

: Plays the data at 1x speed. Press [PLAY] or click

in the function

menu.

Pressing [PLAY] from the monitoring mode will always prompt multi

playback mode. Also, pressing [PLAY] to play the recording from the

last time a playback has been viewed.

PAUSE

: Pauses the playback. Press [PAUSE] or click

in the function

menu.

STOP

: Stops the playback. Press [STOP] or click

in the function menu.

FWD

: Press [FWD] to modify playback speed (x2, x4, x8, x16, x32, x64,

x1/2, x1, x2, x4,

…

). Pressing [FWD] during a live visual feed will

play the recording from 1 minute ago. Clicking

in the function

Содержание SVR-1680


































































































Результаты поиска

Содержание SVR-1680

Отзывы:

Похожие инструкции для SVR-1680

Бренды по названию

Популярные бренды

Samsung SVR-1680, Руководство пользователя

Результаты поиска

Содержание SVR-1680

Отзывы:

Похожие инструкции для SVR-1680

Бренды по названию

Популярные бренды