Samsung SVR-1650, Руководство пользователя

Страница: 72 / 104

70
5.9 Communication setup
Setup items needed to connect a computer to a network. Communication setup screen is as shown below. If
‘ENTER’ key, located in the front of DVR, is pressed or if lower level menu is selected with the mouse,
detailed items may be viewed.
5.9.1 NETWORK
9
TYPE [Ethernet/xDSL] : Select the network
type connected to the computer.
9
DHCP [ON/OFF] : Select whether to get the
IP address automaticcally using the Dynamic
Host Configuration Protocol.
9 IP ADDRESS : Input the [IP address ]
obtained from the internet service company
of the user.
9 SUBNET MASK : Input the [SUBNET
MASK] address obtained from the internet
service company of the user.
9 GATEWAY : Input the [GATEWAY] address obtained from the internet service company of
the user.
9
DNS : Input the [DNS] address obtained from the internet service company of the user.
9
PORT : [PORT] assigned when connecting to a computer can be changed. If port is changed
in the DVR, When the network setup is changed, it takes time to setup the network module
again. Connect after 1~2 minutes. Port number can be setup depending on network
conditions (firewall etc.).
DEFAULT PORT : 4000