Samsung SVR-1650, Руководство пользователя

Страница: 67 / 104

SVR-1650/1640 User Manual
65
5
9 REPEAT RECORD MODE : If HDD capacity is used up during video recording, recording
will by continued by overwriting the data at the front of the HDD.
ON: If there is no more space left in the HDD, repetitive video recording will be
carried out by over writing the oldest data.
OFF: If there is no more space left in the HDD, video recording will be halted.
9
WARNING LEVEL : If available space in the hard disk drive reaches the setup percentage, a
warning message will be displayed to the user. Possible setup range is 1
∼ 10% and 5 ∼ 10%
is generally used.
9
AUDIO : Select whether to store voice information.
Scheduled video recording mode can be used to setup the date and time when video recording will
be carried out automatically.
5.7.2 Record program
[PROGRAM] can be used to adjust the FRAME RATE,
QUALITY and RESOLUTION to setup video recording
for M&E and S&E.
A program may be selected or directly setup depending on
the desired number of frames and resolution. For event
recording, setup is possible for up to the maximum
number of frames that can be stored in one channel.
If events occur in more than two channels, the number of
frames recorded can be adjusted automatically.
Video recording quality can be setup as Low, Middle, High or Super. When an
event occurs, an image quality above High is recommended.
M : Manual, Q : Quality, E : Event, Q : Quality
Program : Each video recording quality and channel values have A~T program.