background image

Screen Timeout 

This is the time before the administration screen will revert

to the port status screen.  

Daily Maintenance Time 

This is the time when SVM performs routine daily

maintenance. Daily maintenance will save the system tables and perform mes-
sage purging (Voice Mail or Announcement features). Inputs must be specified
in 24-hour time. The default setting is 3:00 AM.

Subscriber Default Password 

The digits used as the default settings for

extension and mailbox passwords. Password can be from 1 to 8 digits.
When a mailbox or extension password is reset, this is the value that the pass-
word will be reset to. The default setting is 0000.

System Admin 

This affects both the 

GUI

 and the 

TUI. W

ith the GUI, this

password gives the administrator access to all parameters.  It is the highest
level password and allows the administrator access to shutting the system
down. With the TUI, this password along with the remote login procedure gives
the administrator access to Recording System Prompts and Overriding the sched-
uling by engaging a specific mode.

Application Admin 

This affects the GUI only and denies access to only  

three areas: System Wide Parameters, 

Exit SVM, 

and Port Activity. This is

typically given out to an administrator’s assistant.  Though accessing the  
system with this password could still allow the user to damage the application,

Programming - Page 58

Содержание SVMi-4
























































































































































































































Отзывы: