Samsung SV-DVD50, Руководство по обслуживанию

Страница: 217 / 226

Operating Instructions
Samsung Electronics 4-23
Dynamic Compr
ession
PCM Down Sampling
51
DVD
DVD
Dynamic Compression constrains the dynamic range, i.e. the difference between the quietest and loudest passages of a DVD soundtrack. This enables you to limit loud noises, such as explosions, or raise the volume of quiet passages, such as whispering, while watching a movie. This is convenient for viewing movies late at night.
1
Open “MENU”
With the DVD in stop mode, press the MENU button.
2S
elect “DVD”
Use the
›
or
‚
buttons to highlight “DVD ”
then press the OK or
Š
buttons.
3
Select “Audio Setup”
Highlight “Audio Setup,” then press the O
K
or
Š
buttons.
4
Set “Dynamic Compression”
Highlight “Dynamic Compression,” then press the O
K
or
Š
buttons to select one of the following options: •
On - The total dynamic range of the DVD soundtrack will be compressed, so quiet passages will be louder and loud passages will be softer.
•
Off – The original dynamic range will be preserved.
DTS Dolby Digital Out MPEG-2 Digital Out PCM Down Sampling
Setup
Setup
Setup :
Display Setup
Off On
DTS Dolby Digital Out MPEG-2 Digital Out PCM Down Sampling
Setup
Setup
Setup :
Display Setup
Off On
1
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2S
elect “DVD”
Use the
›
or
‚
buttons to highlight “DVD ”
then press the OK or
Š
buttons.
3
Select “Audio Setup”
Highlight “Audio Setup,” then press the O
K
or
Š
buttons.
4
Set “PCM Down Sampling”
Highlight “PCM Down Sampling”, then press the OK or
Š
buttons to
select one of the following options: •
Off – When the disc with 96K of Audio disc insert in, it will output
96K without any change.
•
On - When the disc with 96K Audio inserted in, it will downsize
96K
to 48K and output it.
50
If your A/V receiver is equipped with a DTS decoder, your DVD-VCR can output DTS digital sound, but you MUST enable this feature in the menu system. NOTE: Select “On” ONLY if you have connected a DTS-equipped A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on the DVD-VCR back panel.
1
Open “MENU” With the DVD in stop mode, press the MENU button.
2
Select “DVD” Use the
›
or
‚
buttons to highlight “DVD ”
then press the OK or
Š
buttons.
3
Select “Audio Setup” Highlight “Audio Setup,” then press the O
K
or
Š
buttons.
4
Set “DTS” Highlight “DTS”, then press the OK or
Š
buttons to select one of
the following options:
• Off - To use your DVD-VCR with an A/V receiver NOT equipped
with a DTS decoder.
•
On – To use your DVD-VCR with an A/V receiver equipped with
a DTS decoder.
If your A/V receiver is equipped with a MPEG-2 decoder, your DVD-VCR can output MPEG-2 sound, but you MUST enable this feature in the menu system to prevent damage to your speakers.
1
Open “MENU”
With the DVD in stop mode, press the MENU button.
2
Select “DVD”
Use the
›
or
‚
buttons to highlight “DVD ”
then press the OK or
Š
buttons.
3
Select “Audio Setup”
Highlight “Audio Setup,” then press the O
K
or
Š
buttons.
4
Set “MPEG-2 Digital Out”
Highlight “MPEG-2 Digital Out,” then press the
Š
or OK
button to select one of the following options: •
PCM - To use your DVD-VCR with an A/V receiver NOT equipped with a Dolby Digital decoder.
•
Bitstream – To use your DVD-VCR with an A/V receiver equipped th a Dolby Digital decoder.
MPEG-2 Digital Out DTS
DTS Dolby Digital Out MPEG-2 Digital Out PCM Down Sampling
Setup
Setup
Setup :
Display Setup
DTS Dolby Digital Out MPEG-2 Digital Out PCM Down Sampling
Setup
Setup
Setup :
Display Setup
Off On
DVD DVD