background image

the party's predecessor in interest had or could give under the previous 

paragraph, plus a right to possession of the Corresponding Source of 

the work from the predecessor in interest, if the predecessor has it or 

can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the rights 

granted or affirmed under this License. For example, you may not 

impose a license fee, royalty, or other charge for exercise of rights 

granted under this License, and you may not initiate litigation (including a 

cross-claim or counterclaim in a lawsuit) alleging that any patent claim is 

infringed by making, using, selling, offering for sale, or importing the 

Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this 

License of the Program or a work on which the Program is based. The 

work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims owned or 

controlled by the contributor, whether already acquired or hereafter 

acquired, that would be infringed by some manner, permitted by this 

License, of making, using, or selling its contributor version, but do not 

include claims that would be infringed only as a consequence of further 

modification of the contributor version. For purposes of this definition, 

"control" includes the right to grant patent sublicenses in a manner 

consistent with the requirements of this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free 

patent license under the contributor's essential patent claims, to make, 

use, sell, offer for sale, import and otherwise run, modify and propagate 

the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express 

agreement or commitment, however denominated, not to enforce a 

patent (such as an express permission to practice a patent or covenant 

not to sue for patent infringement). To "grant" such a patent license to a 

party means to make such an agreement or commitment not to enforce 

a patent against the party.
If you convey a covered work, knowingly relying on a patent license, and 

the Corresponding Source of the work is not available for anyone to 

copy, free of charge and under the terms of this License, through a 

publicly available network server or other readily accessible means, then 

you must either (1) cause the Corresponding Source to be so available, 

or (2) arrange to deprive yourself of the benefit of the patent license for 

this particular work, or (3) arrange, in a manner consistent with the 

requirements of this License, to extend the patent license to downstream 

recipients. "Knowingly relying" means you have actual knowledge that, 

but for the patent license, your conveying the covered work in a country, 

or your recipient's use of the covered work in a country, would infringe 

one or more identifiable patents in that country that you have reason to 

believe are valid.
If, pursuant to or in connection with a single transaction or arrangement, 

you convey, or propagate by procuring conveyance of, a covered work, 

and grant a patent license to some of the parties receiving the covered 

work authorizing them to use, propagate, modify or convey a specific 

copy of the covered work, then the patent license you grant is 

automatically extended to all recipients of the covered work and works 

based on it.
A patent license is "discriminatory" if it does not include within the scope 

of its coverage, prohibits the exercise of, or is conditioned on the 

non-exercise of one or more of the rights that are specifically granted 

under this License. You may not convey a covered work if you are a party 

to an arrangement with a third party that is in the business of distributing 

software, under which you make payment to the third party based on the 

extent of your activity of conveying the work, and under which the third 

party grants, to any of the parties who would receive the covered work 

from you, a discriminatory patent license (a) in connection with copies of 

the covered work conveyed by you (or copies made from those copies), 

or (b) primarily for and in connection with specific products or 

compilations that contain the covered work, unless you entered into that 

arrangement, or that patent license was granted, prior to 28 March 

2007.
Nothing in this License shall be construed as excluding or limiting any 

implied license or other defenses to infringement that may otherwise be 

available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or 

otherwise) that contradict the conditions of this License, they do not 

excuse you from the conditions of this License. If you cannot convey a 

covered work so as to satisfy simultaneously your obligations under this 

License and any other pertinent obligations, then as a consequence you 

may not convey it at all. For example, if you agree to terms that obligate 

you to collect a royalty for further conveying from those to whom you 

convey the Program, the only way you could satisfy both those terms 

and this License would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have permission 

to link or combine any covered work with a work licensed under version 

3 of the GNU Affero General Public License into a single combined work, 

and to convey the resulting work. The terms of this License will continue 

to apply to the part which is the covered work, but the special 

requirements of the GNU Affero General Public License, section 13, 

concerning interaction through a network will apply to the combination 

as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions 

of the GNU General Public License from time to time. Such new versions 

will be similar in spirit to the present version, but may differ in detail to 

address new problems or concerns.
Each version is given a distinguishing version number. If the Program 

specifies that a certain numbered version of the GNU General Public 

License "or any later version" applies to it, you have the option of 

following the terms and conditions either of that numbered version or of 

any later version published by the Free Software Foundation. If the 

Program does not specify a version number of the GNU General Public 

License, you may choose any version ever published by the Free 

Software Foundation.
If the Program specifies that a proxy can decide which future versions of 

the GNU General Public License can be used, that proxy's public 

statement of acceptance of a version permanently authorizes you to 

choose that version for the Program.
Later license versions may give you additional or different permissions. 

However, no additional obligations are imposed on any author or 

copyright holder as a result of your choosing to follow a later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT 

PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE 

STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER 

PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF 

ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT 

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 

FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO 

THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. 

SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE 

COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED 

TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER 

PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS 

PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING 

ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL 

DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE 

PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR 

DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY 

YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO 

OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER 

OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF 

SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided above 

cannot be given local legal effect according to their terms, reviewing 

courts shall apply local law that most closely approximates an absolute 

waiver of all civil liability in connection with the Program, unless a 

warranty or assumption of liability accompanies a copy of the Program in 

return for a fee.

end OF terMS And cOnditiOnS

How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest 

possible use to the public, the best way to achieve this is to make it free 

software which everyone can redistribute and change under these terms.

Содержание SRN-4000







































































































































































Отзывы: