background image

d)  

If a facility in the modified Library refers to a function or a table of 
data to be supplied by an application program that uses the 
facility, other than as an argument passed when the facility is 
invoked, then you must make a good faith effort to ensure that, in 
the event an application does not supply such function or table, 
the facility still operates, and performs whatever part of its purpose 
remains meaningful. 

(For example, a function in a library to compute square roots has a 
purpose that is entirely well-defined independent of the application. 
Therefore, Subsection 2d requires that any application-supplied function 
or table used by this function must be optional: if the application does 
not supply it, the square root function must still compute square roots.)

These requirements apply to the modified work as a whole. If identifiable 
sections of that work are not derived from the Library, and can be 
reasonably considered independent and separate works in themselves, 
then this License, and its terms, do not apply to those sections when 
you distribute them as separate works. But when you distribute the 
same sections as part of a whole which is a work based on the Library, 
the distribution of the whole must be on the terms of this License, 
whose permissions for other licensees extend to the entire whole, and 
thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your 
rights to work written entirely by you; rather, the intent is to exercise the 
right to control the distribution of derivative or collective works based on 
the Library.

In addition, mere aggregation of another work not based on the Library 
with the Library (or with a work based on the Library) on a volume of a 
storage or distribution medium does not bring the other work under the 
scope of this License.

3. 

You may opt to apply the terms of the ordinary GNU General Public 

License instead of this License to a given copy of the Library. To do this, 
you must alter all the notices that refer to this License, so that they refer 
to the ordinary GNU General Public License, version 2, instead of to this 
License. (If a newer version than version 2 of the ordinary GNU General 
Public License has appeared, then you can specify that version instead 
if you wish.) Do not make any other change in these notices.

Once this change is made in a given copy, it is irreversible for that copy, 
so the ordinary GNU General Public License applies to all subsequent 
copies and derivative works made from that copy. 

This option is useful when you wish to copy part of the code of the 
Library into a program that is not a library.

4.

 You may copy and distribute the Library (or a portion or derivative of 

it, under Section 2) in object code or executable form under the terms 
of Sections 1 and 2 above provided that you accompany it with the 
complete corresponding machine-readable source code, which must 
be distributed under the terms of Sections 1 and 2 above on a medium 
customarily used for software interchange.

If distribution of object code is made by offering access to copy from a 
designated place, then offering equivalent access to copy the source 
code from the same place satisfies the requirement to distribute the 
source code, even though third parties are not compelled to copy the 
source along with the object code.

5. 

A program that contains no derivative of any portion of the Library, 

but is designed to work with the Library by being compiled or linked 
with it, is called a “work that uses the Library”. Such a work, in isolation, 
is not a derivative work of the Library, and therefore falls outside the 
scope of this License.

However, linking a “work that uses the Library” with the Library creates 
an executable that is a derivative of the Library (because it contains 
portions of the Library), rather than a “work that uses the library”. The 
executable is therefore covered by this License. Section 6 states terms 
for distribution of such executables.

When a “work that uses the Library” uses material from a header file 
that is part of the Library, the object code for the work may be a 
derivative work of the Library even though the source code is not. 
Whether this is true is especially significant if the work can be linked 
without the Library, or if the work is itself a library. The threshold for this 
to be true is not precisely defined by law.

If such an object file uses only numerical parameters, data structure 
layouts and accessors, and small macros and small inline functions (ten 
lines or less in length), then the use of the object file is unrestricted, 
regardless of whether it is legally a derivative work. (Executables 
containing this object code plus portions of the Library will still fall under 
Section 6.)

Otherwise, if the work is a derivative of the Library, you may distribute 
the object code for the work under the terms of Section 6. Any 
executables containing that work also fall under Section 6, whether or 
not they are linked directly with the Library itself.

6. 

As an exception to the Sections above, you may also combine or link 

a “work that uses the Library” with the Library to produce a work 
containing portions of the Library, and distribute that work under terms 

of your choice, provided that the terms permit modification of the work 
for the customer’s own use and reverse engineering for debugging such 
modifications.

You must give prominent notice with each copy of the work that the 
Library is used in it and that the Library and its use are covered by this 
License. You must supply a copy of this License. If the work during 
execution displays copyright notices, you must include the copyright 
notice for the Library among them, as well as a reference directing the 
user to the copy of this License. Also, you must do one of these things: 

a)  

Accompany the work with the complete corresponding machine-
readable source code for the Library including whatever changes 
were used in the work (which must be distributed under Sections 
1 and 2 above); and, if the work is an executable linked with the 
Library, with the complete machine readable “work that uses the 
Library”, as object code and/or source code, so that the user can 
modify the Library and then relink to produce a modified 
executable containing the modified Library. (It is understood that 
the user who changes the contents of definitions files in the Library 
will not necessarily be able to recompile the application to use the 
modified definitions.) 

b)  

Use a suitable shared library mechanism for linking with the Library. 
A suitable mechanism is one that (1) uses at run time a copy of the 
library already present on the user’s computer system, rather than 
copying library functions into the executable, and (2) will operate 
properly with a modified version of the library, if the user installs 
one, as long as the modified version is interface-compatible with 
the version that the work was made with. 

c)  

Accompany the work with a written offer, valid for at least three 
years, to give the same user the materials specified in Subsection 
6a, above, for a charge no more than the cost of performing this 
distribution. 

d)  

If distribution of the work is made by offering access to copy from 
a designated place, offer equivalent access to copy the above 
specified materials from the same place. 

e)  

Verify that the user has already received a copy of these materials 
or that you have already sent this user a copy.

For an executable, the required form of the “work that uses the Library” 
must include any data and utility programs needed for reproducing the 
executable from it. However, as a special exception, the materials to be 
distributed need not include anything that is normally distributed (in 
either source or binary form) with the major components (compiler, 
kernel, and so on) of the operating system on which the executable 
runs, unless that component itself accompanies the executable.

It may happen that this requirement contradicts the license restrictions 
of other proprietary libraries that do not normally accompany the 
operating system. Such a contradiction means you cannot use both 
them and the Library together in an executable that you distribute.

7.

 You may place library facilities that are a work based on the Library 

side-by-side in a single library together with other library facilities not 
covered by this License, and distribute such a combined library, 
provided that the separate distribution of the work based on the Library 
and of the other library facilities is otherwise permitted, and provided 
that you do these two things:

a)  

Accompany the combined library with a copy of the same work 
based on the Library, uncombined with any other library facilities. 
This must be distributed under the terms of the Sections above.

b)  

Give prominent notice with the combined library of the fact that part 
of it is a work based on the Library, and explaining where to find the 
accompanying uncombined form of the same work.

8. 

You may not copy, modify, sublicense, link with, or distribute the 

Library except as expressly provided under this License. Any attempt 
otherwise to copy, modify, sublicense, link with, or distribute the Library 
is void, and will automatically terminate your rights under this License. 
However, parties who have received copies, or rights, from you under 
this License will not have their licenses terminated so long as such 
parties remain in full compliance.

9.

 You are not required to accept this License, since you have not signed 

it. However, nothing else grants you permission to modify or distribute 
the Library or its derivative works. These actions are prohibited by law if 
you do not accept this License. Therefore, by modifying or distributing 
the Library (or any work based on the Library), you indicate your 
acceptance of this License to do so, and all its terms and conditions for 
copying, distributing or modifying the Library or works based on it.

10.

 Each time you redistribute the Library (or any work based on the 

Library), the recipient automatically receives a license from the original 
licensor to copy, distribute, link with or modify the Library subject to 
these terms and conditions. You may not impose any further restrictions 
on the recipients’ exercise of the rights granted herein. You are not 
responsible for enforcing compliance by third parties with this License.

11. 

If, as a consequence of a court judgment or allegation of patent 

infringement or for any other reason (not limited to patent issues), 
conditions are imposed on you (whether by court order, agreement or 
otherwise) that contradict the conditions of this License, they do not 
excuse you from the conditions of this License. If you cannot distribute 

Содержание SRD-873D











































































































































Отзывы: