background image

8. Termination.

You may not propagate or modify a covered work except as expressly 
provided under this License. Any attempt otherwise to propagate or 
modify it is void, and will automatically terminate your rights under this 
License (including any patent licenses granted under the third paragraph 
of section 11).

However, if you cease all violation of this License, then your license from 
a particular copyright holder is reinstated (a) provisionally, unless and 
until the copyright holder explicitly and finally terminates your license, 
and (b) permanently, if the copyright holder fails to notify you of the 
violation by some reasonable means prior to 60 days after the 
cessation.

Moreover, your license from a particular copyright holder is reinstated 
permanently if the copyright holder notifies you of the violation by some 
reasonable means, this is the first time you have received notice of 
violation of this License (for any work) from that copyright holder, and 
you cure the violation prior to 30 days after your receipt of the notice.

Termination of your rights under this section does not terminate the 
licenses of parties who have received copies or rights from you under 
this License. If your rights have been terminated and not permanently 
reinstated, you do not qualify to receive new licenses for the same 
material under section 10.

9. Acceptance Not Required for Having Copies.

You are not required to accept this License in order to receive or run a 
copy of the Program. Ancillary propagation of a covered work occurring 
solely as a consequence of using peer-to-peer transmission to receive a 
copy likewise does not require acceptance. However, nothing other 
than this License grants you permission to propagate or modify any 
covered work. These actions infringe copyright if you do not accept this 
License. Therefore, by modifying or propagating a covered work, you 
indicate your acceptance of this License to do so.

10.  Automatic Licensing of Downstream Recipients.

Each time you convey a covered work, the recipient automatically 
receives a license from the original licensors, to run, modify and 
propagate that work, subject to this License. You are not responsible for 
enforcing compliance by third parties with this License.

An “entity transaction” is a transaction transferring control of an 
organization, or substantially all assets of one, or subdividing an 
organization, or merging organizations. If propagation of a covered work 
results from an entity transaction, each party to that transaction who 
receives a copy of the work also receives whatever licenses to the work 
the party’s predecessor in interest had or could give under the previous 
paragraph, plus a right to possession of the Corresponding Source of 
the work from the predecessor in interest, if the predecessor has it or 
can get it with reasonable efforts.

You may not impose any further restrictions on the exercise of the rights 
granted or affirmed under this License. For example, you may not 
impose a license fee, royalty, or other charge for exercise of rights 
granted under this License, and you may not initiate litigation (including 
a cross-claim or counterclaim in a lawsuit) alleging that any patent claim 
is infringed by making, using, selling, offering for sale, or importing the 
Program or any portion of it.

11. Patents.

A “contributor” is a copyright holder who authorizes use under this 
License of the Program or a work on which the Program is based. The 
work thus licensed is called the contributor’s “contributor version”.

A contributor’s “essential patent claims” are all patent claims owned or 
controlled by the contributor, whether already acquired or hereafter 
acquired, that would be infringed by some manner, permitted by this 
License, of making, using, or selling its contributor version, but do not 
include claims that would be infringed only as a consequence of further 
modification of the contributor version. For purposes of this definition, 
“control” includes the right to grant patent sublicenses in a manner 
consistent with the requirements of this License.

Each contributor grants you a non-exclusive, worldwide, royalty-free 
patent license under the contributor’s essential patent claims, to make, 
use, sell, offer for sale, import and otherwise run, modify and propagate 
the contents of its contributor version.

In the following three paragraphs, a “patent license” is any express 
agreement or commitment, however denominated, not to enforce a 
patent (such as an express permission to practice a patent or covenant 
not to sue for patent infringement). To “grant” such a patent license to a 
party means to make such an agreement or commitment not to enforce 
a patent against the party.

If you convey a covered work, knowingly relying on a patent license, and 
the Corresponding Source of the work is not available for anyone to copy, 
free of charge and under the terms of this License, through a publicly 
available network server or other readily accessible means, then you must 
either (1) cause the Corresponding Source to be so available, or (2) 
arrange to deprive yourself of the benefit of the patent license for this 
particular work, or (3) arrange, in a manner consistent with the 
requirements of this License, to extend the patent license to downstream 

recipients. “Knowingly relying” means you have actual knowledge that, but 
for the patent license, your conveying the covered work in a country, or 
your recipient’s use of the covered work in a country, would infringe one or 
more identifiable patents in that country that you have reason to believe 
are valid.

If, pursuant to or in connection with a single transaction or arrangement, 
you convey, or propagate by procuring conveyance of, a covered work, 
and grant a patent license to some of the parties receiving the covered 
work authorizing them to use, propagate, modify or convey a specific 
copy of the covered work, then the patent license you grant is 
automatically extended to all recipients of the covered work and works 
based on it.

A patent license is “discriminatory” if it does not include within the scope 
of its coverage, prohibits the exercise of, or is conditioned on the 
non-exercise of one or more of the rights that are specifically granted 
under this License. You may not convey a covered work if you are a 
party to an arrangement with a third party that is in the business of 
distributing software, under which you make payment to the third party 
based on the extent of your activity of conveying the work, and under 
which the third party grants, to any of the parties who would receive the 
covered work from you, a discriminatory patent license (a) in connection 
with copies of the covered work conveyed by you (or copies made from 
those copies), or (b) primarily for and in connection with specific 
products or compilations that contain the covered work, unless you 
entered into that arrangement, or that patent license was granted, prior 
to 28 March 2007.

Nothing in this License shall be construed as excluding or limiting any 
implied license or other defenses to infringement that may otherwise be 
available to you under applicable patent law.

12. No Surrender of Others’ Freedom.

If conditions are imposed on you (whether by court order, agreement or 
otherwise) that contradict the conditions of this License, they do not 
excuse you from the conditions of this License. If you cannot convey a 
covered work so as to satisfy simultaneously your obligations under this 
License and any other pertinent obligations, then as a consequence you 
may not convey it at all. For example, if you agree to terms that obligate 
you to collect a royalty for further conveying from those to whom you 
convey the Program, the only way you could satisfy both those terms 
and this License would be to refrain entirely from conveying the 
Program.

13.  Use with the GNU Affero General Public License.

Notwithstanding any other provision of this License, you have 
permission to link or combine any covered work with a work licensed 
under version 3 of the GNU Affero General Public License into a single 
combined work, and to convey the resulting work. The terms of this 
License will continue to apply to the part which is the covered work, but 
the special requirements of the GNU Affero General Public License, 
section 13, concerning interaction through a network will apply to the 
combination as such.

14. Revised Versions of this License.

The Free Software Foundation may publish revised and/or new versions 
of the GNU General Public License from time to time. Such new 
versions will be similar in spirit to the present version, but may differ in 
detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program 
specifies that a certain numbered version of the GNU General Public 
License “or any later version” applies to it, you have the option of 
following the terms and conditions either of that numbered version or of 
any later version published by the Free Software Foundation. If the 
Program does not specify a version number of the GNU General Public 
License, you may choose any version ever published by the Free 
Software Foundation.

If the Program specifies that a proxy can decide which future versions of 
the GNU General Public License can be used, that proxy’s public 
statement of acceptance of a version permanently authorizes you to 
choose that version for the Program.

Later license versions may give you additional or different permissions. 
However, no additional obligations are imposed on any author or 
copyright holder as a result of your choosing to follow a later version.

15. Disclaimer of Warranty.

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT 
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE 
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER 
PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY 
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT 
NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF 
THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE 
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY 
SERVICING, REPAIR OR CORRECTION.

Содержание SRD-873D











































































































































Отзывы: