background image

English

 

_71

 WEB VIEWER

CONNECTED DVR

This displays the IP address and the status of the connecting DVR.

 

M

 

Connection failure message

No Response

 : Appears when the DVR does not respond.

Access Denied

 

: Appears when the maximum number of users is exceeded.

 

The number of simultaneous connections are limited to 4.

Setting the display of the OSD time information

Select <

DVR Time

> or <

PC Time

> for the OSD time information display 

setting. 

• 

DVR Time

 : Based on the time of the connected DVR

• 

PC Time

 : Based on the time of the PC currently running the Web Viewer.

• 

Audio

 : Sound On/Off

CHANGING THE LIVE SCREEN MODE

 

4-split mode does not support “

SEQUENCE

”, “

PREVIOUS

” and “

NEXT

”.

• 

SEQUENCE

 : When this button is clicked, screens are switched at a 

preset interval. 
In SINGLE MODE, the channel numbers are sequentially switched from 
1 to 4. 
In QUAD MODE, the screen refreshes at the preset interval.

 

Preset interval (10 seconds)

• 

PREVIOUS

 : When this button is clicked, the previous screen appears.

In QUAD MODE, the screen is refreshed.

• 

NEXT 

: When this button is clicked, the next screen appears.

In SINGLE MODE, the channel numbers are sequentially switched from 
1 to 4.
In QUAD MODE, the screen is refreshed.

Содержание SRD-440

























































































































Отзывы: