Samsung SRD-440, Руководство пользователя

Страница: 58 / 120

58_ using the DVR
using the DVR
Mailing Service
You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.
M

If an event occurs with a channel where the camera’s video is set to < OFF > or the remaining recording count is set
to < OFF >, only the text notification will be sent to the applicable email address.
SMTP Setting
Sets the SMTP mail server.
Using the mouse may help make setup easier.
1. In the < Network > setting window, press the up/down
( ) button to move to < Mailing Service > and press the
[ ENTER ] button.
2. Select < SMTP >.
You will see the SMTP setting window.
3. Use direction buttons (
◄ ►
) to move to a desired item
and set the value.
•
ServerType : Displays the connected server type.
•
Server : Enter a server to connect to.
•
Port : Sets the communication port.
•
Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
•
User : Enter a user to use authentication when connecting to the SMTP server.
•
Password : Enter the password of the SMTP server user.
•
Secure Transfer : Select one from < Never > and < TLS(if Available) >.
•
Sender : Use the virtual keyboard to provide the email address.

Refer to “ Using Virtual Keyboard ”. (Page 30)
•
TEST : Conducts the test on the server settings.
4. When the SMTP setting is done, press < OK >.
Event Setting
You can set the interval and type of the event that will be sent to the user.
Using the mouse may help make setup easier.
1. In the < Network > setting window, press the up/down
( ) button to move to < Mailing Service > and press the
[ ENTER ] button.
2. Select < Event >.
3. Use direction buttons (
◄ ►
) to move to a desired item
and set the value.
•
Event Interval : Set the event interval.

If a series of events occurs, the e-mail will be sent at the specified
interval, not on each event.
•
Use Event Transfer : Select an event type to send if an event occurs.
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
4. When the event setting is done, press < OK >.
Mailing Service
SMTP
Event
OK Cancel
Use Authentication
Group Recipient

ServerType SMTP mail Server

Server

Port 25

User

Password
 Secure Transfer Never

Sender ex. user@example.net
TEST
Mailing Service
SMTP
OK Cancel
Recipient

Event Interval 10 min

Use Event Transfer
Sensor Motion
Change P/W HDD Info Video Loss
Power On/Off Manual Record
Event
Group