English
_87
●
Setup
Screen
•
Iris F-No : If the iris mode is set to Manual, specify the F number of the iris.
`
As F-No increases, the iris decreases, so the screen is darkened, and as F-No decreases, the
screen is brightened.
•
AGC mode : Select AGC Control mode.
Adjust the gain value of the video (that, in particular, was recorded at a low
contrast scene and had a lower brightness level than normal) to control the video
brightness.
`
SSNR, Sens-up and <
Auto
> mode in daytime/nighttime mode setting cannot be used if the AGC
mode is set to <
Off
>.
`
Sens-up and <
Auto
> mode in daytime/nighttime mode setting cannot be used if the AGC mode is
set to <
Manual
>.
•
AGC Val : If the AGC mode is set to Manual, specify one between 0dB and 36dB.
Special Setup
1.
Select <
Special
>.
2.
Select each item and set it properly.
•
DIS : Automatically compensates for
the flicker on the screen.
`
DIS cannot be used if VA/MD is used.
`
Digital zoom cannot be used if DIS is used.
•
Day & night : You can switch the
mode to adjust the black and white level as well as the colors.
- Color : Always displays the video in colors.
- B/W : Always displays the video in black and white.
- Auto : Displays in color mode during normal daytime and switches to black and
white mode in a low contrast scene at night.
`
Auto daytime/nighttime mode setting cannot be selected if the AGC mode in the <
Exposure
>
menu is set to <
Off
> or <
Manual
>.
•
Dwell time : This is the time while each applicable lighting condition is kept in
order to enable the switch between day and night modes.
•
Duration : Specify the time interval of lighting at which the sequence operation is
triggered.
•
Sharpness mode : Adjust the overall sharpness of the image.
If selecting <
on
>, you can adjust the sharpness of the image.
•
Sharpness level : The higher the level is, the sharper and clearer the outline of the
image becomes.
•
Color level : Adjust the color level of the image.
