setup screen
108_
setup screen
5.
Select a desired <
Defined area Based rules
>.
•
Entering : This event rule detects an event of object’s center entering into the
defined area from outside through the boundary of the area.
•
Exiting : This event rule detects an event of object’s center exits from the inside of
the defined area through the boundary of the area.
6.
Click [
oK
].
To cancel the specified area, hover the mouse over the area and right-click to display
the context menu. Select [
Delete
] or [
clear (
)
].
7.
When done, click [
apply (
)
].
to set entire area based rule
1.
Set <
iv analysis function
> to
<
enable
>.
2.
Set the type to <
Line/area/
tampering(Scene change)
>.
3.
If you set the event rule to <
entire
area based rules
>, this will display the
popup window.
4.
Select a desired <
entire area Based
rules
>.
•
Scene Change : An event where the
screen is changed at more than a certain time interval will be detected.
`
Detecting a scene change may take a while from the actual change.
`
For stability purposes, the operation pauses for a short period when a scene change event occurs,
and no other detection instance of events (including scene change) functions within the duration.
`
Detection performance may drop under circumstances such as monotonous background, night or
low lighting.
5.
Click [
oK
].
To cancel the existing area, right-click on the Entire area to display the popup dialog
and select [
Delete
] in the context menu.
6.
When done, click [
apply (
)
].
