English
_81
●
Setup
Screen
Smart codec setup
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1.
From the Setup menu, select the
<
audio & video (
)
> tab.
2.
Click <
Smart codec setup
>.
3.
Select ROI Area.
•
Face Detection : Active if a face is
recognized on the monitoring screen.
M
`
Face detection is enabled only if the
following conditions are met:
-
The face is positioned at ±45 degrees to the left or right from the top.
-
The effective range of the face rotation is ±30 degrees vertically, and ±60 degrees horizontally.
-
The minimum size of the face is 20x20 based on the resolution of 320x240.
•
Manual : Specify the ROI area to monitor manually.
4.
Select a quality and detection sensitivity for the ROI area.
5.
If manually specifying the ROI area, select a desired area with the mouse pointer and
drag it as much as you want.
`
You can specify up to 5 distinct areas.
6.
To cancel your selection, simply click [
].
7.
When done, click [
apply (
)
].
J
`
The Smart codec will not be active if it is set to <
Off
> in <
Video profile
>. (page 71)
