Samsung SNOW-1810U, Руководство по установке

Страница: 99 / 124

Samsung Electronics
9-1 Control Program for PCs
9. Settings and How to Use
•
New Connection-Connect
1. When you are using the previous version of S-BOX, select
“Without Cabinet IP” option.
2. If you are using UHD S-BOX, select “With Cabinet IP
(UHD)” option. You should designate the IP Address of
the LED Cabinet by each port. Set the number of units
connected, and then click “Connect”.
3. If you are using FHD S-BOX, select “With Cabinet
IP(FHD)”. Set the IP Address and the number of units
connected in LED Cabinet, and then click “Connect”.
※ If you have already set the IP on the Cabinet, check “Connect with
existing settings” option.
※ For the case of UHD, if you are going to use only some of the
four(4) ports, input the IP Address only for that particular Group
relevant with your use.
LSM(LED Signage Manager)
98
※ Same S-box IP
※ Different setting from S-box IP & Different Setting from each Group
[★ Cautions!] Recommend to use static IP address for the LED devices.
If DHCP is used, IP address is changed automatically and LSM can be
disconnected.
The 192.168.10.x band is used for internal communication of the LED Cabinet.
Please use IP another IP band (except 192.168.10.x band)
Do not assign the temporary IPs, assign the LED IPs (4 EA) through IT
manager.